Blog

Vapor Blasting Bali

Vapour Blasting

What is Vapour Blasting ?

Vapor blasting, also known as wet blasting or liquid honing, is rapidly becoming the number one choice for applications requiring the highest quality of surface finish.

Wet blasting machines use the vapor blasting process to simultaneously degrease and blast industrial components, of many different shapes and sizes.

The key to vapor blasting is that the finish is produced through flow of water borne abrasive, giving a finer finish due to the flushing action of the water. No media is impregnated into the component, nor is there any dust created by the break-up of media, unlike dry blasting where the finish is produced by sheer force of media impact.

A specially designed glandless polyurethane pump agitates water and media into a slurry, which is contained within the cabinet sump. Delivery of the slurry to the manual blast nozzle is via a glandless polyurethane pump and associated hoses located inside the machine. The slurry is pumped at approximately 2 bar to the nozzle, and compressed air is introduced at the blast nozzle to accelerate the slurry and provide the cleaning effect on impact, albeit cushioned.

After contact with the component the slurry then drains back into the sump creating a re-circulating system. Fine broken down media and other contaminants are fed via an overflow to a sedimentation filter located at the rear of the cabinet.

Leave a Reply

Your email address will not be published. Required fields are marked *

 
Translate ยป